Sectionalizer 2019-08-30T03:49:23+00:00

Sectionalizer

Features

The Joongwon SF6 Gas Insulated Sectionalizer is designed to meet increasing requirement of the electric utility industry, providing a safe, low maintenance, long life, economical device to perform load switching on overhead distribution lines. The switch is applicable to 17(max. 17.5) , 27(max. 27), 38(max. 38)kV the overhead distribution systems. It can be operated manually or electrically via controller with FTU and should be mounted to the cross arm of a pole.
The switch will be of three-phase design to maintain an open/closed state regardless of the energized status of the circuit and we provide you the operating rod for manual operation.

  • Pure puffer techniques, no leakage current path between open contacts.
  • Simple operating mechanism
  • Switchgear vessel made of stainless steel.
  • Double sealing techniques with EPDM rubber
  • Minimal maintenance required for the high voltage unit
  • Easy installation and operation
  • Overpressure relief device
  • Low gas pressure interlock device
Inquiry

Ratings

Item RATINGS
 Type JWSEC17 JWSEC27 JWSEC38
Rated system voltage(kV) 17.5 27 38
Rated current(A) 630 630 630
Rated frequency(㎐) 50 / 60 50 / 60 50 / 60
 Rated short-time withstand current(1s)(kA, rms) 16 16 16
Rated short-circuit making current(Peak)(kA, rms) 41.6 41.6 41.6
Lighting impulse withstand voltage (1.2×50μs)(kV) 110 150 170
 Power frequency withstand voltage (1min)(kV) 50 60 70
Rated gas Pressure(at 20℃, gauge)(MPa) 0.07 0.07 0.07
 Gas capacity(Liter) 125 135 140
Bushing Material Polymer Polymer Polymer
Weight(body)(kg) 100 120 130
Weight(controller)(kg) 60
Insulating material SF6 Gas
 Mechanical endurance(times) 10,000
Rated control voltage(V) AC 110 – 240 V / DC 24V
Operating Method Electric / Manual
Surge Arrester Option
Terminal Type Nema 2hole, Clamp, Busbar
Ambient temperature(℃) -25 to 70
Ambient humidity(%) ≤ 100
Altitude(m) ≤ 3 000
Applied standard IEEE Std. C37.63